Put the M96SHDM into gear and you’ll immediately feel the power of this 95 net horsepower engine. You’ll notice it in all applications, but especially when pulling heavy loads. The M96SHDM’s engine also boasts an output of 84 PTO horsepower, low fuel consumption, and Kubota reliability.

"Swing Shift" with creep speeds give you access to a total of 24 speeds! The synchronized main shift's "H" pattern provides the first 4 speeds. Swing Shift adds four more speeds by actuating the electric-over-hydraulic high/low synchronized range shift, giving you access to a total of 8 speeds, all controlled by a single lever. If a task requires more than 8 speeds, move the auxiliary range lever on the left of the seat to gain access to 16 more speeds, including 8 creep speeds.

Mounted to the left of the steering column, the shuttle lever’s fingertip control makes it possible to shift smoothly from forward to reverse without using the clutch or stopping the tractor.

The Category II 3-point hitch accepts a variety of rearmounted implements. The hitch's telescopic stabilizers and lower link ends simplify hook-up and adjustments. The hitch has a capacity of 4630 lbs. (2100 kg). Optional dual assist cylinders raise the capacity to 7490 lbs. (3400 kg).

The hydraulic PTO clutch allows you to engage the implement drive system smoothly, which helps reduce operator fatigue. And because the PTO is independent, you don’t have to stop the tractor to engage or disengage the PTO, saving you time when operating implements.

To enable the M96SHDM to perform at its best, we offer 13.6-38 Bias R1, 9.5 R48, and 12.4 R46 R1W Radial tires as options.