With three blades per disc, Kubota mowers provide a 50% higher cutting frequency compared to conventional solutions. This means a third less load per blade,...
The Kubota cutterbar’s high cooling and lubrication efficiency oil pump system reduces wear and tear. The fully welded cutterbar with overlapping C-channels makes for a...
Shear protection of gear wheels and the drive system designed to break in case or overload or major contact. Once sheared, the hub is easily...
The complete mowing section, is suspended independently from the main chassis by either two or four long adjustable suspension springs, allowing field tracks and contours...
All DMC8000 models can be fitted with an easy-to-use wide spreading kit. This enables crop to be cut and spread in one operation, saving both...
A simple crank adjusts the whole cutterbar assembly angle up or down to a desired stubble height. While standard with 40mm skid shoes, additional 20mm,...
The Kubota SemiSwing tine conditioner with adjustable conditioning hood is highly adaptable to varying crop types. During operation tines will stay in a fixed position,...
Roller conditioning provides gentle, yet effective handling of fragile crop such as alfalfa or clover. The adjustable spring-controlled pressure exerted between the two rollers guarantees...
Standard swivel gearbox allows for tight turns without stress on driveline or tractor PTO system. This feature allows for tighter headland turns and increases daily...
Easy adjustable windrow width ranging from narrow to widespread. Capable rear deflector is fully adjustable to help stand the crop up or lay it down...
Single-bolt or optional hydraulic stubble height adjustment, Swing-away front curtain and hood, Optional hydraulic roller separation kit, and accessible cable and hose routing.
The optional BX belt merger kit can be fitted on trailed DMC's to deposit one swath onto another creating fuller windrows. When not needed, it...
Disc Mower Conditioners
24 Months / Unlimited Hours Warranty
DMC8000 Series
Disc Mower Conditioners
The DMC8000 Series left handed drawbar disc mower conditioners are equipped with features such as fully welded cutterbar, independent active suspension, your choice of SemiSwing or chevron roller conditioners, and FlipOver wide spreading to meet every request with exceptional performance. Working width 9'6" (2.8m) - 11'6" (3.5m).
24 Months / Unlimited Hours Warranty
Left Hand Trailed
9'2" (2.8m)
Rubber Roller
70.0 HP
540/1000 RPM
Left Hand Trailed
9'2" (2.8m)
SemiSwing Tine
70.0 HP
540/1000 RPM
Left Hand Trailed
10'6" (3.2m)
Rubber Roller
80.0 HP
540/1000 RPM
Left Hand Trailed
10'6" (3.2m)
SemiSwing Tine
80.0 HP
540/1000 RPM
Left Hand Trailed
11'6" (3.5m)
Rubber Roller
90.0 HP
540/1000 RPM
Left Hand Trailed
11'6" (3.5m)
SemiSwing Tine
90.0 HP
540/1000 RPM
